The Jib Luffing Telescopic Type BMU

The Jib Luffing Telescopic Type BMU

The Jib Luffing Telescopic Type BMU is an ideal working access for facade works of high-rising buildings as facade construction, decoration,maintenance and so on ,And it is belong to permanently suspended platform. The window cleaner is a special equipment for high-rise building facades and lighting roof cleaning and maintenance operations.

Product Details

The Jib Luffing Telescopic Type BMU introduction

The Jib Luffing Telescopic Type BMU is an ideal working access for facade works of high-rising buildings as facade construction, decoration,maintenance and so on ,And it is belong to permanently suspended platform. The window cleaner is a special equipment for high-rise building facades and lighting roof cleaning and maintenance operations.

1(24).jpg

Fixed chassis BMU with luffing and telescopic jib show

1.Suspension mechanism &Platform

Surface treatment with hot galvanized craft, the steel is not easy to rust.The service life can be as long as 15 years , more durable than spraying process.

2.Safety lock 

The lock cylinder uses special stainless steel , with strong impact resistance, higher toughness,wear resistant, long services life,safe and reliable.

3.Electric control system 

Perfect circuit design, including leakage protection, current overload protection,emergency braking,operate simply.

4.Cable

Using national standard cable 2.5*3+1.5*2, using life is longer.

1(001).jpg

Safety operation procedures

BMU is aerial equipment with people inside, the operator must be well trained. Only when he gets the operation permit can operate the BMU, or cannot use the machine, if no, the results will be bad.

The operator has to go in and out the platform on the ground or the roof. Climbing window in the air is forbidden.

When operator works, safety rope is a must (which has to hand to the ground from the roof, cannot put on the suspended platform), the rope has to be hanged singly on fixed part of building top (cannot connected to any part of BMU). Helmet and safety belt are must to the operator, the self lock of the belt has to be connected with the safety rope. After the above measures, operator can start to work.

Safety belt, self lock and safety rope are easy worn out parts, which should be checked carefully by related supervisors after one year, when get the qualified report, can go on being used, or have to replace new and qualified parts.

It is not allowed to change, modify or abandon all safety devices , warnings and marks.

Before working, the BMU has to be checked and record according to the manual( the record is confirmation on BMU completion). If there is a problem, should solve in time. It is not allowed to operate without any check. When doing maintenance, power has to be cut off.

There should be a person specially for BMU management and maintenance, which should be done regularly, adding lubricating oil onto friction parts, and change grease regularly, keeping BMU going stably.

FAQ

1.Q:How can i get to your factory?

A:Our factory is near shanghai Airport, we can pick you up in the airport. 

2.Q:If i will need to stay in your place for few days, is that possible to book the hotel for me?

A:It’s always our pleasure, hotel booking service is available.

3.Q:Is your price competitive?

A:Only good quality products we supply. Surely we will give you best factory price based on superior product and service.

4.Q:How is your goods quality?

A:We cooperated with many world class companies for many years,. our products received good response from our customers.


Inquiry