Disassembly of parts in roof rail type window cleaner

- Mar 25, 2019-

Before the roof rail type window cleaning machine is disassembled, the equipment should be inspected thoroughly, and the relevant conditions of the window cleaning machine should be recorded. The disassembly process parks the suspension platform on a flat, solid floor. Remove the wire rope and cable to remove the weight and start the down button to pull the wire rope out of the hoist and safety lock.

 

Turn off the power of the roof rail type window cleaner and pull the wire rope at the position of the hanging mechanism. The wire rope was unloaded from the hanging mechanism, rolled into a 60 cm diameter disk and tied with a rope. The power cable is removed from the power distribution box, the power cable is removed from the gondola electrical box, and the power cable is placed on the ground.

 

Remove the hanging mechanism to remove the bolts, remove the reinforcing steel wire rope with the screw buckle and the front and rear support; remove the bolts, remove the front and rear back beams; remove the weight. Removed from the roof rail window cleaner, each component must be kept in a safe place for later use. In addition to the disassembly of the roof rail type window cleaner, its installation is also strictly regulated to ensure the stability of the roof rail type window cleaner.www.chinagondola.com