Construction and operation requirements for roof rail type window cleaners
The working platform part of the roof rail type window cleaning machine is mostly made of aluminum alloy and galvanized steel; its safety lock needs to be sent to the inspection organization or manufacturer with corresponding qualifications according to the national standard or standard rules. Can be used at the rear.
The internal load of the roof rail type window cleaner should be kept as uniform as possible. The excess rope on the ground should be collected and cannot be placed casually, thus causing unnecessary problems or troubles. The relevant operators of the roof rail type window cleaning machine should have the corresponding qualifications and qualifications, and they must be able to get on the post after obtaining the employment certificate.
The fixing of the wire rope end of the roof rail type window cleaning machine should meet the design requirements, and the number of rope cards is ≥3. The gearbox and transmission are filled or replaced as required. When the window cleaner is running up, pay attention to the upper limit. When the suspension platform cannot be stopped after the button is released during the ascending and descending process, immediately press the red stop switch on the electric box door to make the suspension platform stop urgently. Keep the electrical box clean and do not put tools or other materials into the box.
After the roof rail type window cleaning machine is installed, it must be accepted. It can only be put into use after the acceptance confirmation confirms that there is no problem. The equipment that has not passed the safety inspection is strictly forbidden to be put into use. At the same time, it is strictly forbidden to use the roof rail type window cleaning machine. Lifting and lifting operations.www.chinagondola.com